Skip to content
Part of the Liquid Science network · B-BBEE Level 2
Laboratory Equipment

Filtration & Sample Preparation

Membrane filtration equipment, filter holders, membranes and sample preparation tools for microbiology, suspended solids and instrumental analysis.

Parameter
Rocker ScientificRange

Rocker TSS Filtration Sets

Recommended pump-and-funnel sets for suspended-solids tests, from single samples to large batches.

5
matched sets
TSS
method
Small–large
batches
Request a quote

Not every model is listed online. If you have a part number or specification, include it in your quote request.

Find by parameter

Related measurements

Brands

Brands we distribute in this category

Choosing Filtration & Sample Preparation: common questions

How do I choose a filtration manifold?

Choose by the number of samples you filter at once. Rocker SolarVac rotary manifolds filter up to 12 samples at the same time and take a range of funnel types.

Which pump and funnel set suits suspended-solids testing?

Rocker TSS filtration sets are matched to batch size, from small batches (Lafil 300-LF30, Rocker 300-MF31, WaterVac 200-MS) to large batches (MultiVac 310/610). Tell us how many samples you run per day and we will recommend a set.

Can I get the membranes and funnels too?

Yes. We supply filtration membranes, funnels and holders with the manifolds, so you can quote the whole set-up together.

What is a lab filtration system?

A laboratory filtration system pulls a sample through a filter or membrane under vacuum. It has a funnel and filter holder (or a multi-position manifold), a vacuum pump and a collection flask. It is used for suspended-solids (TSS) tests and for membrane filtration in microbiology.

Which vacuum pump do I need for laboratory filtration?

Choose an oil-free pump sized to the number of filter positions. A Rocker 300 (about 23 L/min) suits small batches, and larger manifolds need a higher-flow pump such as the Rocker 400. Oil-free pumps keep oil out of your samples. We confirm flow and vacuum figures on quotation.

How do I measure TSS?

Total suspended solids are normally measured by filtering a known volume through a pre-weighed glass-fibre filter, drying the filter at 103 to 105 °C and weighing it again. For continuous readings, an online solids sensor is used instead.

Tell us what you need to measure

Send a product list, part numbers or a tender specification. Our technical team will recommend and quote the right solution.